Sliding doors

We manufacture all our sliding doors according to your measurements, width and height.

Single ceiling track: 44 mm wide, 50 mm high.

Double ceiling track: 86 mm wide, 50 mm high.

Three-track ceiling track (1 double + 1 single ceiling track): 86 mm + 44 mm = 130 mm.

Single floor track for Diamant, Symmetric, Nordica, and Solid: 25 mm wide, 6 mm high.

There is also a single floor track for these sliding door models that can be recessed into the floor. Double floor track for Symmetric, Nordica, and Solid: 66 mm wide, 6 mm high. Double floor track for Opal: 52 mm wide, 7 mm high. Three-track floor track for Diamant, Symmetric, Nordica, and Solid: 108 mm wide, 6 mm high.

First, customize your interior and choose how many doors you want based on this. With 2 or 4 doors, you will always have half of the opening with a good overview. With 3 doors, you can open up 1/3 of the opening. In these cases, you can choose a three-track rail for our more exclusive doors (optional) and access up to 2/3 of the wardrobe.

Yes, we can lacquer our Diamant and Solid sliding doors in any NCS color. However, please expect a few weeks longer delivery time. You can also order an end panel in the same color.

You can choose our Symmetric sliding door as a room divider. It has a profile that is stylish on both the front and back. It is also possible to order the Solid sliding door with the same front and back.

Sliding doors can be installed in most spaces. If you have existing closets, you can also enclose them with sliding doors in front – or complement them with wall-mounted storage from Pelly. It is important to be precise when measuring and to measure the entire opening where the sliding doors will be placed. Measure the distance between the ceiling and the floor in three places where the doors will be installed. Measurements that differ from the standard, such as with slanted ceilings behind or above the sliding doors, are no problem.

In the Support and Assembly Instructions section under Sliding Doors, you will find a video showing how to measure, so be sure to check it out! Then, make a sketch of your space and bring it to one of our retailers.

On a 2-track floor rail (which is standard), position your sliding doors as follows:

2 sliding doors: Place 1 sliding door on the rear/inner track and 1 sliding door on the outer track.
3 sliding doors: Place 2 sliding doors on the rear/inner track (1 on the right and 1 on the left) and 1 sliding door in the center on the outer track.
4 sliding doors: Place 2 sliding doors on the rear/inner track and 2 sliding doors on the outer track. These doors are positioned overlapping.
Always follow the assembly instructions for sliding doors. There you will find the exact steps for both mounting and positioning your sliding doors.

Yes, then you choose Diamant, Symmetric, Nordica or Solid.

If you need wide sliding doors, choose Diamant, Symmetric, or Solid, which can be ordered up to 1477 mm wide.

Yes, it is available as an option for all sliding doors.

Yes, that’s perfectly fine. Just keep in mind if the closets have any pull-out features, such as wire baskets, to ensure the sliding doors do not obstruct them.

The delivery time is usually about 3-5 weeks. Please ask the seller in the store which delivery time applies to your particular choice.